Ford P0526 OBD-II Trouble Code Definition:
P0526 Cooling Fan Speed Sensor Circuit
P0526 Ford OBD-II Trouble CodeDescription:
OBD Trouble Code P0526
Fan Speed Sensor Circuit
What does the code mean? OBD-ii Code P0526 definition:
The powertrain control module (PCM) uses the cooling fan speed signal in order to determine the actual fan speed in relation to the desired fan speed. The PCM uses the cooling fan speed signal in order to reduce the cooling fan noise and in order to maintain the powertrain cooling requirements. The PCM supplies power and ground to the clutch hall effect sensor of the cooling fan clutch. The hall effect sensor returns a signal pulse through the speed signal circuit in response to the reluctor track, which is located inside the fan clutch. If during operation, the PCM detects a loss of the cooling fan speed signal, DTC P0526 will set.
The powertrain control module (PCM) uses the cooling fan speed signal in order to determine the actual fan speed in relation to the desired fan speed. The PCM uses the cooling fan speed signal in order to reduce the cooling fan noise and in order to maintain the powertrain cooling requirements. The PCM supplies power and ground to the clutch hall effect sensor of the cooling fan clutch. The hall effect sensor returns a signal pulse through the speed signal circuit in response to the reluctor track, which is located inside the fan clutch. If during operation, the PCM detects a loss of the cooling fan speed signal, DTC P0526 will set.
Symptoms Sumptoms of OBD code P0526
– Engine Light ON (or Service Engine Soon Warning Light) – Engine overheating
– Engine Light ON (or Service Engine Soon Warning Light) – Engine overheating
Causes Causes of the OBD-II code P0526
– Cooling fan harness and connector – Faulty cooling fan The Error code is generally activated on detection of the following conditions: The P0526 code is detected when the PCM has detected a loss of cooling fan speed signal and the condition is present for at least 11 seconds.
– Cooling fan harness and connector – Faulty cooling fan The Error code is generally activated on detection of the following conditions: The P0526 code is detected when the PCM has detected a loss of cooling fan speed signal and the condition is present for at least 11 seconds.
Solutions