Ford P0650 OBD-II Trouble Code Definition:
P0650 Malfunction Indicator Lamp Control Circuit Malfunction
P0650 Ford OBD-II Trouble CodeDescription:
OBD Trouble Code P0650
Malfunction Indicator Lamp (MIL) Control Circuit
What does the code mean? OBD-ii Code P0650 definition:
Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.
Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.
Symptoms Sumptoms of OBD code P0650
– Engine Light ON (or Service Engine Soon Warning Light)
– Engine Light ON (or Service Engine Soon Warning Light)
Causes Causes of the OBD-II code P0650
– Harness or connectors for the MIL circuit is open or shorted – MIL bulb may be faulty – Faulty ECM The Error code is generally activated on detection of the following conditions: – An excessively high voltage is sent to ECM through the MIL circuit under the condition that calls for MIL light up. – An excessively low voltage is sent to ECM through the MIL circuit under the condition that calls for MIL not to light up.
– Harness or connectors for the MIL circuit is open or shorted – MIL bulb may be faulty – Faulty ECM The Error code is generally activated on detection of the following conditions: – An excessively high voltage is sent to ECM through the MIL circuit under the condition that calls for MIL light up. – An excessively low voltage is sent to ECM through the MIL circuit under the condition that calls for MIL not to light up.
Solutions